Northern Colorado Siding

If you are looking for vinyl siding in and around Fort Collins Colorado, here at Northern Colorado Siding we can help you with your siding project.
We offer free estimates with no pressure. We have been siding homes since 1975 and have been in the front range mountain region for 15 years. Working out of Loveland, we find most of our projects are in the Fort Collins area.
With Northern Colorado Siding, you deal with me, the owner, installer, service rep, secretary, project manager and the buck stops here guy.
So when I say We, I mean Me.
For a free vinyl siding estimate in Fort Collins or Loveland you can use my contact page or call 970-461-1305.

Using the same material they use for fiberglass windows, Marvin Windows & Doors is expanding into exterior siding creating a composite panel they are calling Apex.

Building Products.com is reporting on their website that
Marvin will produce the new Apex Siding System at its Tecton Products subsidiary in Fargo, N.D., which Marvin co-founded in 1990 to supply fiberglass components to its window plants in Fargo and Roanoke, Va.

Hanson Building Products, Ramsey, Mn., was selected as the first Apex distributor and will market the product to area builders, remodelers, and architects.

The siding will be marketed as an alternative to wood or vinyl siding, reportedly with a finish four times thicker than paint and offering resistance to rot, mold, fading and warping.

Having vinyl siding on your home gives you pretty much a maintenance free exterior. There are sometimes when vinyl siding repair is needed. This will cover repair to the outside vinyl corner post. This is a job that is not that difficult to the trained professional, and I have seen this repair done several different ways. This is the best and correct way to replace a vinyl siding corner so the repair will last.

This is considering your existing vinyl siding corner is still being manufactured today. A lot of manufactures have changed their siding designs over the years and have even discontinued some product lines, which would be a subject of a future article.

We start by taking a utility knife or snips to open up the existing corner.

We then cut back the old corner so as to leave a “J” channel type of effect on the wall.

We then cut back the new corners nail and first return leg. This give us a cap to snap over the old corner “J” that we left on the wall.

Snapping the new corner takes some time and it helps to have a “Zip” tool to help getting the new cap to lap over and cover the existing J piece.

After you do a couple of hundred of these you can pretty much do one in about an hour. You can click on any image to see a larger view.

In relation to selecting rainwater systems, many people presume they have no choice at all. That is to say that their property had a rainwater system set up when they moved there, therefore they keep with the one they have got. Similarly many individuals, particularly in the UK where there’s a strong bias towards the employment of plastic material for rainwater systems, imagine there is not really any choice anyway.

Each of these assumptions are completely wrong. Those people who have a type of guttering because it was there when they moved to their residence might however have a choice. That is not to imply they need to hurry out and purchase guttering just for the sake of it, but when the time comes to fix or perhaps replace their old rainwater system they will be able to make a choice. Also, those people that grudgingly choose plastic simply because it is just what their neighbors have and it is what was there to start with have the choice. Plastic was only mass produced for the first time during and just after the Second World War: what do you suppose people used for guttering up until then?

Earlier than plastic people used cast iron, copper as well as aluminum and earlier than those they used lead. Actually plastic only actually grew to become popular as a material for rainwater systems because it was affordable, simple to make and light. Together with these strengths, though, came the problems of environmentally harmful production and the requirement for regular replacement due to plastic being not a very durable material.

This piece of writing is not written with the objective of rubbishing plastic gutters which serve their objective effectively enough. Rather it proposes to merely help to make people conscious of the other alternatives available and what they offer. Aluminum, for example, is a wonderful guttering material that is much more long lasting as compared to plastic. Aluminum rainwater systems aren’t overly pricey, but do cost a bit more than plastic ones. However they have the negatives of being easy to bend and dent which is problematic wherever there is any chance of them getting knocked by branches or hailstones, and also danger of them coming loose from walls due to them reacting with other metals used to screw them on.

Copper rainwater systems are really beneficial to our environment, considering the fact that almost all of the copper used is recycled. These are especially popular on the continent where they constitute many of the gutters. These are much more highly-priced than plastic and aluminum but will keep working more than a hundred years. On top of that they are generally regarded as appealing due to the oxidization process.

If money actually is no object then cast iron gutters are a great idea. They hark back to Victorian days of grandeur. Also, after copper they are the most durable of the rainwater systems.

When the time comes to replace or choose rainwater systems, it will be hoped that householders will take into account their options seriously. Rainwater systems in various materials have a good deal to offer concerning longevity, attractiveness and cost, so it is crucial that people consider the whole set of selections.

Aluminum ladders are a popular choice among many home owners and tradesmen because of three features: they are lightweight, easy to handle, and durable. When you store your ladders outdoors, you naturally don’t want them to rust or rot. Aluminum is the material you want. Aluminum ladders can withstand daily use, along with the dent and dings constant use brings. Depending on the kind of safety and load you will put your ladders through, you must select the right aluminum ladder for the job. For electrical work, such as those that need complete insulation, you need fiberglass ladders. This is because aluminum has high conductivity.